ZM6 Smart Regulator ( temperature Probe)
The ZM6 units can be configured for either 12 Volt or 24 Volt operation, as well as N or P switching, through the use of on-board jumpers. If your installation requires 24 Volt operation, please notify us so that we can provide an ignition suppressor for your setup.
Each unit is supplied complete with a comprehensive 28-page installation manual and user guide to assist with setup and operation. Additionally, a buzzer and light are included for enhanced notification and monitoring.
The standard temperature sensing probe is three metres long and is available for $20. For custom requirements, probes can be made to a maximum length of eight metres for $45.
Alternatively, users wishing to construct their own temperature probe can do so by connecting a 10k NTC thermistor to the ZM6 unit. Suitable NTC thermistors, such as the RN3440, are available from suppliers like Jaycar.
The ZM6 unit is priced at NZ$340, with additional freight charges applicable.
Each unit is supplied complete with a comprehensive 28-page installation manual and user guide to assist with setup and operation. Additionally, a buzzer and light are included for enhanced notification and monitoring.
The standard temperature sensing probe is three metres long and is available for $20. For custom requirements, probes can be made to a maximum length of eight metres for $45.
Alternatively, users wishing to construct their own temperature probe can do so by connecting a 10k NTC thermistor to the ZM6 unit. Suitable NTC thermistors, such as the RN3440, are available from suppliers like Jaycar.
The ZM6 unit is priced at NZ$340, with additional freight charges applicable.