Optional temperature probe
The unit is supplied with a 3 metre cable for convenient installation. It includes an 8 mm ring terminal designed for mounting to the alternator, along with two spade terminals for connection to the ZM6 unit.
Two calibration resistors are provided with the kit, preset for operation at either 50°C for battery monitoring or 90°C for alternator monitoring.
Other temperature settings can be configured by following the instructions detailed in the accompanying booklet.
Longer cable lengths are available upon request to suit different installation requirements.
Comprehensive instructions for constructing your own temperature probe are also provided.
Two calibration resistors are provided with the kit, preset for operation at either 50°C for battery monitoring or 90°C for alternator monitoring.
Other temperature settings can be configured by following the instructions detailed in the accompanying booklet.
Longer cable lengths are available upon request to suit different installation requirements.
Comprehensive instructions for constructing your own temperature probe are also provided.