Shopping

Payment:

If you wish to pay by direct credit we can generate an invoice and send to you,or you can go to the check out and pay there.

We accept most major credit cards, a card fee of 2.8% transaction fee is charged

Paypal is acceptable with a 4.6% transaction fee is charged

Cash on pickup is also accepted.

Delivery will not occur until payment has been received.

If you wish to order "TheWorks" or "Setup" option for a ZM6 please also go to our downloads page and complete the ZM6 Settings Request Form, which is an editable PDF form, if you are unsure just drop us an email.

For items in our PRODUCTS page that are not showing here, drop us an email and we can invoice and or discuss variations to the product as described.

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

ZM6 Smart Regulator ( Base Unit)

August 2022 and we are releasing the new ZM6 improved Smart Regulator
These units are user set to 12 and 24 Volt operating voltage and N or P switching by on board jumpers. Unit supplied complete with a 24 page installation manual and user guide, Also included is a buzzer/light. Note no temperature probe with base option, nor is it set up for voltage or polarity.
NZ$320 plus freight

NZ$ 320.00
ZM6 Smart Regulator ( Temperature Probe)

These units are user set to 12 and 24 Volt operating voltage and N or P switching by on board jumpers. Unit supplied complete with a 24 page installation manual and user guide, Also included is a buzzer/light.
Temp sensing probe three metre standard length $20 or custom-made length (max 8 metres) $45
For those wanting to make their own temp probe it is simply a matter of connecting a 10k NTC to the ZM6. An NTC can purchased from the likes of Jaycar (RN3440)
The unit works by sensing the resistance of the temp bulb.
NZ$340 plus freight

NZ$ 340.00
ZM6 Smart Regulator ( Set up)

Setup for your voltage and polarity and battery type, we can take the hassle out of the install process by setting up the parameters of your unit. Note: As these units are built for four scenarios the setting will alter between differing units.
There are instructions on setting these up yourself or we can do it for you.
NZ$25 per unit (use form in download section to indicate desired settings)
Therefore, a total of $345 plus freight

NZ$ 345.00
ZM6 Smart Regulator (The works)

These units are user set to 12 and 24 Volt operating voltage and N or P switching by on board jumpers. Unit supplied complete with a 24 page installation manual and user guide, Also included is a buzzer/light.
Unit is set up for your requirements, voltage and alternator polarity
Temp sensing probe three metre standard length
NZ$360 plus freight

NZ$ 360.00
ZM5 Smart Regulator

ZM5 Smart Regulator 12 or 24 volt N and P Switching, complete with installation manual, buzzer
Call for availability as no longer in production, however we have remaining stocks on hand

NZ$ 280.00
Digital Counter

Bright LED display
Non interference processing hardware.
Unit will count up and also down
Will retain last number on power shut down
Can be reset via a push button switch
Power supply 11volts DC to 35volts DC
See download page for more information

NZ$ 55.00
Digital Tachometer

This digital tachometer is small, cost-effective display range is from 5-9999 RPM , it can accurately measure the RPM of the engine and various motors. My picture does not do justice to how clear the digits really are.
This unit works by gluing a small round magnet (supplied) to the rotating mass (flywheel) and attaching a small reed switch (supplied) to pick up the pulses. Mount the reed switch 5 to 25mm from the rotating magnet.

Features & Specifications
• Power requirement: DC 8-24V
• Measure range: 5-9999RPM.
• Clear zero: Automatic,
• Clear zero time: about 10s.the greater the RPM value, the longer the clear zero time.
• Refresh frequency: 0.2-0.5S@120-1200RPM;0.25-0.06S@2400-9999RPM.
• Measure indication: RPM<5000,±2;RPM>5000,±3.
• Display: RED 0.56” LED
• Input sign: Magnetic reed switch and magnet (supplied)
• Dimension:72 x 36 x 20 mm,panel cut out Dimension:68 x 33 mm

NZ$ 50.00
Rocinate - Gerry

Product as per invoice 1682

NZ$ 1,116.10